Self polishing copper based antifouling...2.5 Litres

Mare Nostrum was origionally developed for coastal fleet vessels and has consequently been used extensively on fishing and off shore craft. This self polishing copper based antifouling is suitable for any type of vessel with white (available on back order only) suitable for aluminium boats. Mare Nostrum is an ablative, or self polishing antifouling and consequenty over the course of the year the weight of paint is reduced thereby giving the advantage to the yachtsman of longer periods between stripping multi-coats of antifouling.

Available Colours:   Red, Blue and White
Film thickness:   Wet: 100 microns, Dry: 50 microns
Application:   Brush, roller, conventional and airless spray
Coverage:   10.4msq/lt
Drying times*:   Touch dry: 30mins, Dry to recoat: min 8hrs, Launching: min 12hrs
Can sizes:   2.5 Litres
Primer:   Antipest on new substrate Vinyl Primer as tiecoat for unknown antifouling
Thinner:   No. 7 *(For Thinners see bottom of page)

* Dependent upon temperature

* Dependent upon temperature

TopOne single pack urethane topcoat...0.75 Litres (White also in 2.5Ltrs)

TopOne is a single pack urethane alkyd enamel for general interior and exterior use. Formulated from carefully selected raw materials, TopOne provides an economical finish which combines durability with a brilliant gloss and excellent resistance to yellowing; even when used in those dark spaces below decks. TopOne is easy to apply by brush, has good hiding power and will withstand almost anything that the marine environment can throw at it.

Available Colours:    White, Black and Dark Blue.
Film thickness:   Wet: 80 microns, Dry: 40 microns
Application:   Brush, roller, conventional and airless spray
Coverage:   12msq/lt
Drying times*:     Touch dry: 2 hrs, Dry to recoat: min 18 hrs
Can sizes:    0.75 Litres and 2.5 Litres
Primer:     Vinyl Primer
Thinner:     No. 7 *(For Thinners see bottom of page)

Price €72.00

(2.5 Litres)

* Dependent upon temperature

VinylPrimer...2.5 Litres & 0.75 Litres

Anticorrosion primer for use both above and below the waterline on all types of surfaces. Can be used on wood and steel boats.

Available Colours:    Aluminium grey only.
Film thickness:   Wet: 210 microns, Dry: 80 microns
Application:   Brush, roller, conventional and airless spray
Coverage:   14.8 msq/lt
Drying times*:     Touch dry: 15 mins, Dry to recoat: min 2 hrs
Can sizes:    2.5 Litres & 0.75 Litres
Thinner:     No. 7 *(For Thinners see bottom of page)

* Dependent upon temperature

Ravilakk varnish...0.75 Litres

Ravilakk is a clear high gloss boat varnish made from chinese wood oils ans synthetic amber resin and other raw materials. Ravilakk is both durable and water resistant and gives wood a fine golden tone. Ravilakk can be used for varnishing woodwork above and below the deck.

Available Colours:    Glossy Clear.
Film thickness:   Wet: 70 microns, Dry: 40 microns
Application:   Brush, conventional spray
Coverage:   12 msq/lt
Drying times*:     Touch dry: 6 hrs, Dry to recoat: 24 hrs
Can sizes:    0.75 Litres
Thinner:     No. 2

* Dependent upon temperature

AntiPest...0.75 Litres & 2.5 Litres

Two pack epoxy primer for submerged fibreglass and metal surfaces, including aluminium. Specially suited for osmosis prevention treatment.

Available Colours:    White.
Film thickness:   Wet: 200 microns, Dry: 100 microns
Mixing Ratio:  (In Volume) Base/Hardner 4/1
Application:   Brush, Roller, Conventional spray & Airless Spray
Coverage:   5 msq/lt
Drying times*:     Touch dry: 30mins, Dry to recoat: Min 12 Hours / Max 1 Month.
Can sizes:    0.75 Litres & 2.5 Litres
Thinner:     No. 17

Price €11.75

(3 Litres)

All prices include Vat at 23%. Vat reciept is issued with delivery.